Toyota FJ RTX Instruments 1962-84 FJ40/45

$1,695.00

CURRENTLY- ON BACK ORDER OF 20 WEEKS- ALL ORDERS WILL BE FILLED IN ORDER OF DATE ORDERED- Bring that 1962-84 Toyota FJ40 up to late model standards without disrupting the vintage vibe! A machined aluminum bezel is finished in a matte silver powdercoat to replace the stamped original piece, yet the whole assembly is a drop-in replacement for your stock FJ dash panel. The full-color TFT message center is nestled in the center of the speedometer while an LED bar graph tachometer arches around the outside of the gauge. The idea is 21st century tech with the appearance of stock equipment. Metric units can be had at no additional cost, and diesel-interface components are also available!

Starting from scratch, CNC machined housings are filled with electronics designed and built in-house, helping Dakota Digital once again raise the bar for aftermarket instrumentation. The high-definition TFT message centers can be fully configured to display just about any piece of information needed. As you鈥檝e come to expect from Dakota Digital, the RTX series utilizes a central control box to make installation and setup as easy as possible. Click the tabs below for a more in-depth look at the RTX series!

Analog Gauges
Speedometer
路0 -120 MPH (optional metric version 0- 200 kmh)
Oil Pressure
路0- 80 psi
Water Temperature
路100- 260潞F (optional metric version 40- 120潞C)
Fuel Level
路E, 1/4, 1/2, 3/4, F
Voltmeter
路9- 17 VDC
Digital Bar Graph Gauges
Tachometer
路0- 8,000 RPM
Digital Message Centers
Standard Displays
路Odometer (One time user settable, Million Mile)
路Dual (A/B) Trip Meter (0- 9,999.9)
路Clock (12 hour)
路Estimated Range/ Miles to Empty
Performance Meters
路0- 60 MPH Timer (0- 100 kmh)
路1/4 and 1/8 mile time
路1/4 and 1/8 mile end speed (trap speed)
路High speed recall
路High RPM recall
Built-in Indicators
Indicators
路Turn Signals (Left/ Right)
路High Beam
路Check Engine
路Parking Brake
路Cruise Control (On/ On & Engaged when vehicle is equipped)
路Gear Position (Optional GSS-2000 sensor required)
路4 x 4 (When vehicle is equipped)
路Wait to Start (When vehicle is equipped)
路Two Auxiliary input indicators with user-programmable labels
路Each analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer)
**Not all OEM indicator lamp functions will be replaced.

If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.

Lighting Technology
Colors
路Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.
Brightness
路Both daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 is a common accessory to add this functionality.
Themes
路With 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself.
Technology
路Full LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make that choice.

Included Sensors
Water Temperature
路1/8″ NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure
路1/8″ NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator
路Replaces GM style speedometer cables with a 10 ft harness and Toyota drive adaptor.
(Tremec and Ford style adaptors available on request.)
Bushings
路Each kit comes with 1/8″ to 1/4″, 3/8″ and 1/2″ NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.

Calibration
Pushbutton
路Dakota Digital RTX instruments can be configured and operated by the push of a button. Simply mount the supplied rocker switch in a convenient and easily accessible location. The rocker switch provides quick and easy access to all functions, in both driving mode or while in the setup menu. Visual and audio button-press feedback is available through the TFT Message Center, or with the included buzzer. The RTX Series can also be completely configured through the Bluetooth app, available for Android and Apple devices. Using your existing tablet or smart phone, download the free app, sync your device to the RTX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display.

SKU: RTX-62T-FJ-X Categories: ,

Description

CURRENTLY- IN STOCK as of聽 4/7/2023 Bring that 1962-84 Toyota FJ40 up to late model standards without disrupting the vintage vibe! A machined aluminum bezel is finished in a matte silver powdercoat to replace the stamped original piece, yet the whole assembly is a drop-in replacement for your stock FJ dash panel. The full-color TFT message center is nestled in the center of the speedometer while an LED bar graph tachometer arches around the outside of the gauge. The idea is 21st century tech with the appearance of stock equipment. Metric units can be had at no additional cost, and diesel-interface components are also available!

Starting from scratch, CNC machined housings are filled with electronics designed and built in-house, helping Dakota Digital once again raise the bar for aftermarket instrumentation. The high-definition TFT message centers can be fully configured to display just about any piece of information needed. As you鈥檝e come to expect from Dakota Digital, the RTX series utilizes a central control box to make installation and setup as easy as possible. Click the tabs below for a more in-depth look at the RTX series!

Analog Gauges
Speedometer
路0 -120 MPH (optional metric version 0- 200 kmh)
Oil Pressure
路0- 80 psi
Water Temperature
路100- 260潞F (optional metric version 40- 120潞C)
Fuel Level
路E, 1/4, 1/2, 3/4, F
Voltmeter
路9- 17 VDC
Digital Bar Graph Gauges
Tachometer
路0- 8,000 RPM
Digital Message Centers
Standard Displays
路Odometer (One time user settable, Million Mile)
路Dual (A/B) Trip Meter (0- 9,999.9)
路Clock (12 hour)
路Estimated Range/ Miles to Empty
Performance Meters
路0- 60 MPH Timer (0- 100 kmh)
路1/4 and 1/8 mile time
路1/4 and 1/8 mile end speed (trap speed)
路High speed recall
路High RPM recall
Built-in Indicators
Indicators
路Turn Signals (Left/ Right)
路High Beam
路Check Engine
路Parking Brake
路Cruise Control (On/ On & Engaged when vehicle is equipped)
路Gear Position (Optional GSS-2000 sensor required)
路4 x 4 (When vehicle is equipped)
路Wait to Start (When vehicle is equipped)
路Two Auxiliary input indicators with user-programmable labels
路Each analog gauge sweep contains a red LED indicator for quick notice of a warning condition (except speedometer)
**Not all OEM indicator lamp functions will be replaced.

If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.

Lighting Technology
Colors
路Over 30 user-selectable color options allow you to independently change the needle color, sweep color and digital TFT display color.
Brightness
路Both daytime and nighttime brightness can be easily controlled through the HDX setup menu, allowing you to choose your preferred lighting intensity level, toggled by the activation of the headlight switch. If on-the-fly rotary type control is desired, the DIM-1 is a common accessory to add this functionality.
Themes
路With 12 factory preset color themes, you can quickly create a beautiful looking system. Or, for the ultimate in customization, choose all of the color zones yourself.
Technology
路Full LED backlighting provides a strikingly visual gauge package, with sharp contrast for ease of viewing both night and day. Full RBG backlighting allows you to create the specific color you want, with a unique daytime and nighttime theme if desired. Whether your goal is an OE look or something truly bold, the HDX Series lets you make that choice.

Included Sensors
Water Temperature
路1/8″ NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure
路1/8″ NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator
路Replaces GM style speedometer cables with a 10 ft harness and Toyota drive adaptor.
(Tremec and Ford style adaptors available on request.)
Bushings
路Each kit comes with 1/8″ to 1/4″, 3/8″ and 1/2″ NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.

Calibration
Pushbutton
路Dakota Digital RTX instruments can be configured and operated by the push of a button. Simply mount the supplied rocker switch in a convenient and easily accessible location. The rocker switch provides quick and easy access to all functions, in both driving mode or while in the setup menu. Visual and audio button-press feedback is available through the TFT Message Center, or with the included buzzer. The RTX Series can also be completely configured through the Bluetooth app, available for Android and Apple devices. Using your existing tablet or smart phone, download the free app, sync your device to the RTX system, and enjoy quick and convenient menu navigation and real time gauge readouts for diagnostic use or a secondary display.

Additional information

Weight 10 lbs